Stage Plot: What to Include, With a Four-Piece Example

For Artists

Photo of JC Sanchez, Founder & CEO of Orphiq

By

|

Founder & CEO, Orphiq

Stage Plot: What to Include, With a Four-Piece Example
Stage Plot: What to Include, With a Four-Piece Example

A stage plot is a simple top-down drawing that shows a sound engineer where each performer stands, what gear sits where, which instruments need microphones, and where monitors and power are needed. Pair it with an input list, keep it to one page, label it clearly, and send it with your advance before the show.

You get the gig, the venue asks for your stage plot, and you realize you have never made one. Don't worry, it is less work than it sounds. Aim for a clear, one-page stage plot.

The engineer who reads it has never met your band. Your plot helps the engineer prepare the stage before you arrive. This guide covers what goes on the plot, how to send it, and a worked example for a four-piece band. If you are still building the bigger picture of your live career, start with How to Manage Your Music Career as an Independent Artist.

What a stage plot is and what goes on it

Think of the plot as a floor plan. It is a view from above, with the audience at the bottom of the page and the back wall at the top. Each person and each piece of gear gets a labeled shape.

Left and right on a stage plot are the performer's left and right, not the audience's. Engineers call these "stage left" and "stage right." With the audience at the bottom, stage left appears on the page's right and stage right on its left. Label both sides clearly.

The plot answers five questions for the crew. Where does everyone stand? What do they play? What needs a microphone or direct box? What does each person need to hear? What needs power?

Element

What to show

Why the engineer cares

Positions

Each performer as a labeled box or circle, with a name or role

They place mic stands and monitors around people

Instruments and amps

Drum kit, amps, keys, pedalboards, with sizes if large

They plan floor space and miking

Microphones

Which sources are miked, and which vocalists sing

They count channels and stands

Monitors

Where each wedge goes, or a note that you use in-ears

They build separate monitor mixes

Power

Marks where outlets are needed

They run power so nothing trips mid-song

Risers

Drum riser or keyboard riser, if you need one

The stage may not have one

Contact

Band name, a contact name and phone

They can reach someone fast

Leave out anything that does not change how the stage is set. You do not need artwork, a logo or the setlist on the plot.

When and how to send it

Send your plot when you advance the show, which means confirming the details with the venue ahead of time. The booker or production contact will usually tell you who to send it to. Ask the production contact how to submit it. A PDF keeps the layout consistent.

Put the plot and the input list together in one file or one email. Name the file with your band name and the word "stage plot," so it is easy to find on a crowded laptop. Bring a printed copy too. Engineers lose emails, but a sheet taped to the stage is hard to miss.

If you are still lining up shows, How to Book a Gig as an Independent Artist covers how to get to the point where a venue asks for this. Your plot can also ride along in your press materials, and How to Create an EPK shows where it fits.

In Orphiq's Live section you can keep the show's date, venue, set times and setlist, and add a prep task such as "send stage plot and input list" so the advance does not slip.

Worked example: a four-piece band

Here is a plot for a four-piece: a lead singer who plays rhythm guitar, a lead guitarist, a bassist who sings backing vocals, and a drummer. Picture the page from above, with the audience at the bottom.

Describe it element by element, because that is exactly what you will write on the page.

  • Drums: upstage center, on a small riser if the venue has one. Label the kit with its parts: kick, snare, hi-hat, one rack tom, one floor tom, two cymbals.

  • Lead singer and rhythm guitar: downstage center, with a vocal mic on a boom stand. Put a small box for the guitar amp behind them on the floor, angled up, and mark the pedalboard.

  • Lead guitarist: stage left of center. Mark the amp, and note that this player does not sing, so the engineer does not set up a mic that nobody uses.

  • Bassist: stage right of center, with a bass amp and a backing vocal mic.

  • Monitors: one wedge for the lead singer, one for the lead guitarist, one shared wedge for the bassist and drummer. If the drummer needs a vocal in their mix, say so.

  • Power: one outlet at each amp position and one near the singer's pedalboard.

Keep the shapes simple. Boxes, circles and arrows are enough. Number the monitor wedges and write the mix on the plot, for example "Mix 1: lead vocal, guitar, kick."

If you play with tracks or a laptop, add a small box for it and mark how it connects. Engineers need to know whether you bring a direct box or expect them to supply one.

The input list that goes with it

The plot shows where things go. The input list shows what the engineer plugs in. They belong on the same page, or the page right after it.

Each row is one channel on the mixing desk. List what you need, how it should be picked up, and any notes.

Channel

Source

Pickup

Notes

1

Kick drum

Kick mic

Stand or clip

2

Snare

Snare mic


3

Hi-hat

Small mic

Optional if the room is small

4

Rack tom

Tom mic


5

Floor tom

Tom mic


6

Overhead left

Overhead mic

Boom stand

7

Overhead right

Overhead mic

Boom stand

8

Bass guitar

Direct box

Amp mic if the venue prefers

9

Lead guitar amp

Mic on cabinet


10

Rhythm guitar amp

Mic on cabinet


11

Lead vocal

Vocal mic

Boom stand

12

Backing vocal (bass)

Vocal mic

Straight stand

That is twelve channels. Confirm the available input channels with the engineer during your advance. It is better to list your ideal and let them cut than to list too little and be stuck.

What sound engineers expect

Engineers like the same things every time.

Use this checklist before you send yours:

  1. The page is one sheet, in portrait or landscape, with the audience direction marked.

  2. Every performer has a name or role, and a clear position.

  3. Every mic and direct box is on the input list, numbered.

  4. Monitors are marked, with what goes in each mix.

  5. Power needs are marked at the right spots.

  6. Gear you bring and gear you expect the venue to supply are separate.

  7. A contact name and phone number are printed on the page.

  8. The text is large enough to read in low light.

Check for these two mistakes before sending your plot. The first is confusing stage left and stage right with the audience's left and right. The second is expecting the venue to supply drums, amps or direct boxes without saying so. If you want house gear, ask in your advance and note it on the plot.

Update the plot when your lineup changes. A fifth member, a keyboard or a new drum setup makes the old file wrong. Keep one master copy and date it, so you never send an old version.

Your setlist and plot work together. If a song needs a guitar swap, a second vocal or a track, that change shows up as a channel or a stand. How to Build a Setlist That Holds a Room covers the set itself, and you can check it against your input list. Browse more guides for artists on the For Artists page.

Frequently Asked Questions

Do I need a stage plot for every show?

Not always. Small bars and open mics often skip it. For anything with a sound engineer and a stage, send one. It saves setup time and shows you are prepared.

What is the difference between a stage plot and an input list?

The stage plot is the drawing of positions, gear, monitors and power. The input list is the table of channels the engineer connects. Send them together so one answers what the other leaves out.

What tool should I use to make a stage plot?

Any tool works if the result is clear. Many bands draw boxes in a slide or drawing app and export a PDF. A neat hand sketch, scanned flat, is also fine.

Should a solo artist make a stage plot?

Yes, a simple one. Show your position, instrument, mic and any laptop or tracks. List the channels. A clear plot helps the engineer prepare for your setup.

Read Next

Get the Show Ready: A plot only helps if it reaches the venue on time. Orphiq lets you keep each show, its setlist and prep tasks in Live, and you can ask Apollo to help you plan the advance questions to send before soundcheck.

Ready for more creativity and less busywork?