Types of Music Notes: Values, Rests, and a Chart

For Artists

Photo of JC Sanchez, Founder & CEO of Orphiq

By

|

Founder & CEO, Orphiq

Types of Music Notes: Values, Rests, and a Chart
Types of Music Notes: Values, Rests, and a Chart

The main types of music notes are whole, half, quarter, eighth, sixteenth, thirty-second and sixty-fourth. Each lasts half as long as the one before it. In 4/4 time, a whole note gets four beats, a half note two, a quarter note one, and an eighth note half a beat. Every note has a matching rest.

You can play by ear for years and never need to know what a sixteenth note is. Then a producer sends you a part, a session player asks for a chart, or you open a piano roll and the grid says 1/16. Suddenly the names matter.

This guide covers the types of music notes in one place: a chart of every value with its beat count, the matching rests, dotted notes, ties and triplets, and a worked bar you can count along with. It stays on note and rest values only. For clefs, dynamics and the rest of the symbols, see Music Symbols and Marks. For the wider picture, start with Music Theory for Artists.

The Note Values Chart

Every note value is a fraction of a whole note. A whole note is the longest common value, and each step down cuts the length in half. The chart below assumes 4/4 time, where a quarter note gets one beat.

Note (US name)

UK name

Beats in 4/4

Fraction of a whole

Notes per bar of 4/4

Whole note

Semibreve

4

1

1

Half note

Minim

2

1/2

2

Quarter note

Crotchet

1

1/4

4

Eighth note

Quaver

1/2

1/8

8

Sixteenth note

Semiquaver

1/4

1/16

16

Thirty-second note

Demisemiquaver

1/8

1/32

32

Sixty-fourth note

Hemidemisemiquaver

1/16

1/64

64

You can tell the values apart by three parts. The head is the oval: hollow for whole and half notes, filled for everything shorter. The stem is the line attached to the head, and whole notes have none. Flags are the curls on the stem, one for an eighth, two for a sixteenth, three for a thirty-second and four for a sixty-fourth.

When several short notes sit side by side, flags turn into beams, the thick bars that join the stems. Two beams mean sixteenth notes, three mean thirty-second notes. Beams change nothing about the length. They just make a fast run easier to read in groups.

How the Beat Math Works

The numbers in the chart do not change with tempo. A quarter note is one beat at 70 BPM and one beat at 170 BPM, so the same note simply passes faster. What changes the beat count is the time signature. In 4/4, the quarter note gets the beat. In standard compound 6/8, each dotted-quarter beat contains three eighth notes, so a quarter note lasts two-thirds of a beat.

For counting, say the beat number on each quarter note. Say "and" between them for eighth notes: "1 and 2 and 3 and 4 and." For sixteenth notes, add the syllables in between: "1 e and a 2 e and a." Tapping your foot on the numbers and speaking the rest keeps the subdivisions honest.

A bar is full when the values add up to the time signature. In 4/4 that means four quarter-note beats, however you slice them. One whole note, two half notes, or eight eighth notes all fill the bar. The first time you see a bar that does not add up, you have found a mistake in the part or a deliberate pickup or irregular bar.

Check any tricky count against a metronome or your DAW's grid before it goes to anyone else. If the song lives in Orphiq, save the counted rhythm as a note linked to it, so your collaborators find it next to the audio and lyrics.

Rests: Silence Has a Value Too

A rest is a note's silent twin. Each note value has a rest of the same length, and a bar has to add up whether it holds sound or not. Counting rests accurately is half of playing in time.

Rest

Beats in 4/4

What it looks like

Whole rest

4

A small block hanging below a line

Half rest

2

A small block sitting on top of a line

Quarter rest

1

A squiggly, zigzag vertical shape

Eighth rest

1/2

A slash with one flag

Sixteenth rest

1/4

A slash with two flags

Thirty-second rest

1/8

A slash with three flags

Sixty-fourth rest

1/16

A slash with four flags

The whole rest and half rest are the pair people mix up. The whole rest hangs down from a line, like a hat on a hook. The half rest sits on a line, like a hat on a head. A whole-rest symbol can also mark a full bar of silence, even outside 4/4. Depending on the time signature, a full-bar rest may instead use a double whole (breve) symbol.

Rests can be dotted just like notes, and they follow the same arithmetic. A dotted quarter rest lasts a beat and a half. Short rests in fast passages are where the counting syllables earn their keep.

Dotted Notes, Ties and Triplets

The chart only covers the plain values. Real parts bend those lengths in three ways.

A dot after a note adds half of that note's value. A dotted half note lasts 3 beats (2 plus 1), and a dotted quarter lasts 1.5 beats (1 plus half a beat). A dotted eighth lasts 3/4 of a beat. A second dot adds half of the first dot, so a double-dotted half note lasts 3.5 beats, though you will rarely see it.

A tie is a curved line joining two notes of the same pitch. You play the first note and hold it through the second. The tie is how a note crosses a barline, and how you write lengths no single note can show, such as 5 beats in 4/4 (a whole note tied to a quarter).

A triplet fits three notes into the space normally taken by two. An eighth-note triplet squeezes three notes into one beat, so each lasts a third of a beat. A quarter-note triplet fits three notes into two beats. You will recognize triplets by the small number 3 over or under the group.

Form

How it works

Length in 4/4

Dotted half

Half note plus half its value

3 beats

Dotted quarter

Quarter note plus half its value

1.5 beats

Dotted eighth

Eighth note plus half its value

0.75 beat

Half tied to quarter

Two notes, one pitch, held

3 beats

Eighth-note triplet

Three notes in the space of one beat

1/3 beat each

Quarter-note triplet

Three notes in the space of two beats

2/3 beat each

Triplet feels are common in blues, jazz and slow soul. A dotted eighth followed by a sixteenth is a common pairing in marches and many guitar parts.

A Worked Bar, Step by Step

Here is how to check any bar in 4/4. We will use two.

  1. Write the total: four beats.

  2. List each value in the bar, left to right, including rests.

  3. Convert each to beats using the chart.

  4. Add them up. The total must be four.

Bar one: a dotted quarter note, an eighth note, and a half note.

The dotted quarter is 1.5 beats, the eighth 0.5 and the half note 2, so the sum is 1.5 + 0.5 + 2 = 4 and the bar is full. Counted aloud, the dotted quarter starts on beat 1 and lasts until the "and" of 2. The eighth lands on that "and," and the half note lands on beat 3.

Bar two: a quarter note, a quarter rest, two eighth notes, an eighth rest and an eighth note.

That is 1 + 1 + 0.5 + 0.5 + 0.5 + 0.5 = 4. You play on beat 1, stay silent on beat 2, play two quick notes on beat 3, stay silent on beat 4, and play the last eighth note on the "and" of 4.

Now add a tie. Take a half note at the end of bar one and tie it to a quarter note at the start of bar two. You hold one pitch for 3 beats, across the barline. This is the move that lets a melody ignore the bar structure while the notation stays exact.

If a bar will not add up, check for a missing dot, a hidden triplet, or a different time signature. Time Signatures Explained for Artists covers the last one.

Where Note Values Show Up Outside the Sheet Music

Plenty of working artists never read a full score and still use note values every day. Your DAW grid is labeled in them: 1/4, 1/8 and 1/16 are quarter, eighth and sixteenth notes. A hi-hat pattern of straight sixteenth notes fills 16 steps in a bar of 4/4. Setting a delay to 1/8 means the echo lands a half beat after the dry note.

Reading a part, you will meet the same values in a different costume. A lead sheet gives you the melody in notes and the chords above it, and a drum chart shows rests as clearly as hits. If you can total a bar, you can follow either one. How to Read Music walks through the full reading process, including pitch.

Frequently Asked Questions

How many types of music notes are there?

This guide covers seven common values, from whole notes to sixty-fourth notes. Longer and shorter values also exist. Each is half the length of the one before. Dotted notes, ties and triplets then stretch or squeeze those lengths.

What is the shortest note in music?

The shortest value in this chart is the sixty-fourth note, worth 1/16 of a beat in 4/4. Shorter values, including 128th notes, also exist.

What is the difference between a note and a rest?

A note tells you to play a pitch for a set length. A rest tells you to stay silent for the same set length. Both take up time in the bar and are counted the same way.

Why do some notes have a dot?

A dot adds half of the note's value. A quarter note lasts one beat, so a dotted quarter lasts one and a half beats. It is a shorter way to write what a tie would otherwise show.

Read Next

From Reading Rhythm to Releasing It: Once the parts are counted and the song is finished, the next job is getting it out. How to Plan a Music Release lays out the steps, and you can ask Apollo, Orphiq's AI music strategist, to propose release tasks with due dates that you review and edit.

Ready for more creativity and less busywork?