What Is the Size of a CD Case? Jewel Case and Insert Specs

For Artists

Photo of JC Sanchez, Founder & CEO of Orphiq

By

|

Founder & CEO, Orphiq

What Is the Size of a CD Case? Jewel Case and Insert Specs
What Is the Size of a CD Case? Jewel Case and Insert Specs

A standard CD jewel case measures 142 x 125 mm (5.59 x 4.92 in). The front booklet panel is about 120 x 120 mm, and the tray card is about 150 x 118 mm (5.91 x 4.65 in). Use the manufacturer's specified bleed and safe areas. Paper inserts commonly use 3 mm bleed.

If you are asking what the size of a CD case is, you are probably about to send artwork to a manufacturer. The numbers below are the ones that matter: case, booklet, tray card, spine and digipak, in millimetres and inches, with bleed and safe area.

Digital cover art is a different job. A square 3000 x 3000 pixel file works for streaming, and Album Artwork Specs and Best Practices covers that side. Print is measured in physical units, and a file that looks right on screen can still be cut wrong at the plant. For the wider plan around a physical run, see How to Plan a Music Release: Step-by-Step Checklist.

If a physical run is part of your release, ask Orphiq's AI music strategist Apollo to add print-file and proof tasks to your Orphiq release plan, so the artwork deadline sits before your release date.

CD Case and Insert Dimensions

Sizes below are the common industry figures. Manufacturers differ by a millimetre or two, so treat this as the spec sheet you check your own template against, not a replacement for it.

Item

Trim size (mm)

Trim size (in)

Bleed

File size with bleed (mm)

Safe area (mm)

Standard jewel case (outer)

142 x 125 x about 10

5.59 x 4.92 x 0.39

n/a

n/a

n/a

Slim case (outer)

142 x 125 x about 5

5.59 x 4.92 x 0.20

n/a

n/a

n/a

Booklet panel (front cover)

120 x 120

4.72 x 4.72

3 mm

126 x 126

114 x 114

4-page booklet, opened flat

240 x 120

9.45 x 4.72

3 mm

246 x 126

3 mm in from every edge

Tray card (back insert)

150 x 118

5.91 x 4.65

3 mm

156 x 124

144 x 112

Spine (each fold of the tray card)

about 6 x 118

0.24 x 4.65

Included in the tray-card artwork; follow its template.

Included in the tray-card artwork; follow its template.

3 mm from top and bottom

Digipak panel (4-panel)

about 139 x 125

5.47 x 4.92

Follow marked guides.

Use the manufacturer's complete dieline.

Follow marked guides.

Disc face

120 diameter, 15 centre hole

4.72 diameter, 0.59 centre hole

Follow the plant's disc-printing template.

Follow the plant's disc-printing template.

follow the plant's template

Sources: standard CD and jewel case dimensions as commonly published by CD manufacturers. Bleed and safe area follow the usual 3 mm print convention. Check your plant's template for exact figures.

Pre-Flight Checklist Before You Send Files

Run through this before any print file leaves your hands.

  1. Get the manufacturer's template for your exact product and build on it, not on this table.

  2. Set each file to the dimensions and bleed specified in the manufacturer's template.

  3. Keep logos, names and track titles at least 3 mm inside the trim.

  4. Export at 300 dpi in CMYK. Your streaming cover is RGB, so convert and check the colours.

  5. Extend backgrounds all the way to the bleed edge.

  6. Check the spine text reads in the right direction and sits clear of the folds.

  7. Confirm the barcode is on the tray card or back panel and scans cleanly.

  8. Ask for a physical proof before the full run.

Jewel Case, Slim Case or Digipak

The jewel case is the classic. A standard jewel case has a hard plastic shell, a disc tray, a front booklet and a back tray card. Tray colours vary. It is the most forgiving to design for because its inserts are simple flat prints.

A slim case has the same width and height as a standard jewel case but is about half as thick. It saves shelf and shipping space. Because it is so thin, check with the plant which inserts it takes before you design anything.

A digipak is a folded cardboard sleeve with a plastic tray glued inside. Some digipaks include a booklet pocket. The packaging artwork spans the panels and spine, so use the template for your chosen configuration. What a digipak costs and when it suits a release is covered in What Is a Digipak? Specs, Costs, and When to Choose One.

The choice changes your files. A jewel case needs a booklet and a tray card. Prepare digipak artwork on the manufacturer's complete dieline and follow its file-submission requirements. Never reuse a jewel case layout for it.

Bleed and Safe Area in Plain Terms

Bleed is the extra artwork past the trim line. Cutting is never perfectly exact, so a background that stops at the trim can leave a thin white edge. Extending the image 3 mm past the line hides any drift.

The safe area is the opposite margin. Anything you cannot afford to lose, such as the artist name, the title or a barcode, stays inside it. For booklet and tray card files, 3 mm inside the trim is the usual rule.

Folds need more care than edges. Panels that fold, like the spine and the digipak hinges, can shift slightly in assembly. Keep text off the fold lines and avoid placing a face or a letter across one.

One more reason to start from the template: your design choices, such as type size and focal point, still have to hold up once the cover is a 120 mm square. Cover Art Design Guide for Singles and Albums covers those choices, and Album Artwork: Design Tips and How to Choose helps with picking a direction. If you work with a designer, send them the plant's template on day one. More guides for artists are collected on For Artists.

Frequently Asked Questions

What size is a CD jewel case?

A standard jewel case is 142 x 125 mm (5.59 x 4.92 in) and about 10 mm thick. A slim case has the same width and height but is roughly half the thickness.

What size is CD cover art for print?

The front booklet panel is about 120 x 120 mm (4.72 x 4.72 in). With 3 mm bleed on each side, build the file at 126 x 126 mm.

How wide is the spine of a CD case?

The spine folds on a tray card are about 6 mm wide each. A digipak spine varies with the tray, so take the exact width from the manufacturer's template.

Do I need CMYK for CD artwork?

Print plants normally print in CMYK, so convert your files and check the colours. Your streaming cover stays RGB.

Read Next

Put the Print Deadline on the Calendar: Artwork specs only help if the files go out in time. Orphiq is where you plan the rest of the release: ask Apollo to build a release plan back from your date, with the print proof and manufacturer deadline included as tasks.

Ready for more creativity and less busywork?